1480430017 Fuel Injector for International/Navistar DT466E diesel engine

Key Information

Part Number: 1480430017, 1830145C90, 1830145C91, 1830145C92, 1830145C93, 1830145C94, 1830146C90, 1830146C91, 1830146C92, 1830146C93, 1830146C94,

Engine Make: Navistar

Inspection Report: Yes

Warranty: 13 Months

Supply Ability: In stock

Payment Way: Paypal, Western Union, Visa, Mastercard, T/T

Details: One model in a neutral box or specific box required by clients.

Category: Fuel Injectors Brand: Navistar

Description
Technical Spec

The 1480430017 Fuel Injector is a genuine International/Navistar part designed for use in DT466E diesel engines. This injector plays a critical role in delivering precise amounts of fuel into the combustion chamber for optimal engine performance.

Key Features:

OEM Part Number: 1480430017
Engine Compatibility: DT466E (and possibly other variants like DT466, HT466, etc.)
Application: Used in International trucks, school buses, and other medium-duty vehicles with the DT466E engine.
Precision Engineering: Ensures proper fuel atomization for efficient combustion and reduced emissions.

Symptoms of a Failing Fuel Injector:

Hard starting or no-start condition
Rough idle or misfiring
Excessive smoke (black or white)
Loss of power or poor acceleration
Increased fuel consumption

Replacement Tips:

Diagnostics: Use a scan tool to check for injector-related fault codes before replacement.

Torque Specifications: Follow Navistar service manual guidelines for proper installation torque.

Sealing Washers: Always replace copper sealing washers to prevent leaks.

OEM Cross References:

1830147C1, 1830147C2, 1830147C3, 1830147C4, 1830148C1, 1830148C2, 1830148C3, 1830148C4, 18360146C92, 2593593C91, 2593593C91-BF, 2593593C92, 2593593C93, 2593593C94, 4830145C92, 7010-PP, 7010PP, EX63812BF, EX63812BF, GA67010, HEUIBF, HEUIBFX, R-2593593C91-BF, R2593593C91BF

Here's a summarized technical specification table for the Navistar/International 1480430017 Fuel Injector (DT466E diesel engine):

Parameter	Specification
OEM Part Number	1480430017
Engine Compatibility	International DT466E (may fit DT466, HT466 variants)
Injector Type	Electro-hydraulic (HEUI) or Mechanical? (Confirm for exact DT466E model year)
Operating Pressure	500–3,000+ psi (HEUI systems vary by ECM control)
Flow Rate	Varies by calibration—typically ~200–400 cc/min (exact specs depend on engine tuning)
Voltage/Resistance	HEUI solenoids: ~3–10 ohms (verify with service manual)
Nozzle Type	Multi-hole (e.g., 6–8 holes for fine atomization)
Seal Type	Copper washer (crush seal)
Torque Specification	35–45 lb-ft (47–61 Nm) (always follow Navistar manual for exact specs)
Weight	~2–3 lbs (0.9–1.4 kg) per injector