1830560C2 for International/Navistar DT466, DT466E Fuel Injector
September 13, 2025
3073996 forCummins L10 Celect Fuel Injector
September 13, 2025
3045102 New Cummins L10 Fuel Injector
Key Information
Part Number: 3027588, 3037229, 3045102, 3045102-C, 3045102-RX, 3045102C, 3045102D, 3045102PX, 3045102R, 3045102RX, 92-13045102, 9213045102,
Engine Make: CUMMINS
Inspection Report: Yes
Warranty: 12 Months
Supply Ability: In stock
Payment Way: Paypal, Western Union, Visa, Mastercard, T/T
Details: One model in a neutral box or specific box required by clients.
The Cummins L10 fuel injector (part number 3045102) is a critical component for the Cummins L10 engine, a popular diesel engine used in medium-duty trucks, buses, and industrial applications.
Key Details:
-
Part Number: 3045102
-
Engine Compatibility: Cummins L10 (10-liter inline-6 diesel engine)
-
Application: Fuel injection system, responsible for delivering precise amounts of fuel into the combustion chamber.
-
Type: Mechanical or electronic, depending on the L10 variant (early models used mechanical injectors, while later versions may have electronic controls).
Symptoms of a Faulty Fuel Injector:
-
Hard starting or no-start condition
-
Rough idle or misfiring
-
Excessive black smoke from exhaust
-
Loss of power or poor acceleration
-
Increased fuel consumption
Here's a summarized table of the technical parameters for the Cummins L10 Fuel Injector (Part #3045102):
| Parameter | Specification |
|---|---|
| Part Number | 3045102 |
| Engine Compatibility | Cummins L10 (10L, inline-6 diesel) |
| Injector Type | Mechanical (early L10) / Electronic (later variants) |
| Nozzle Type | Multi-hole (exact hole count varies by spec) |
| Opening Pressure | ~2,900–3,100 psi (200–210 bar) [Verify for exact model] |
| Flow Rate | Varies by calibration (typically ~200–300 cc/min) |
| Thread Size | M12x1.5 (common for Cummins mechanical injectors) |
| Torque Specification | 35–45 lb-ft (47–61 Nm) [Confirm for exact model] |
| Seal Type | Copper crush washer or O-ring |
| Voltage (if electronic) | 12V (varies by ECM-controlled models) |
| Replacement Interval | 150,000–250,000 miles (inspect/test regularly) |
