
05234785 for Detroit Diesel Series 60 Fuel Injector
September 13, 2025
05237334 for Detroit Diesel Series 60 fuel injector
September 13, 202505234935 for Detroit Diesel Series 60 fuel injector
Key Information
Part Number: 05234935, 148-020-0004, 1480200004, 5234935, 5234935DDCR, 5234935R, 634935
Engine Make: Detroit
Inspection Report: Yes
Warranty: 12 Months
Supply Ability: In stock
Payment Way: Paypal, Western Union, Visa, Mastercard, T/T
Details: One model in a neutral box or specific box required by clients.
Details:
Part Number: 05234935
Application: Detroit Diesel Series 60 (likely for various model years, including 11.1L and 12.7L engines).
Type: Fuel injector (unit injector)
Compatibility:
Fits certain DDEC III, IV, and V engines.
May also cross-reference with other Detroit Diesel part numbers.
The Detroit Diesel Series 60 fuel injector (Part #05234935) is a critical component in the fuel injection system of Detroit Diesel’s Series 60 engines (commonly found in 11.1L and 12.7L variants). Below are its application scenarios, advantages, and key features:
1. Application Scenarios
-
This fuel injector is primarily used in:
✔ Heavy-Duty Trucks (Freightliner, Kenworth, Peterbilt, Volvo, etc.)
✔ Commercial Vehicles (Buses, Coaches, Fire Trucks)
✔ Industrial & Marine Engines (Generator sets, marine propulsion)
✔ Mining & Construction Equipment (Off-road applications) -
Compatible Engines:
-
Detroit Diesel Series 60 (DDEC III, IV, V)
-
11.1L & 12.7L configurations
-
Commonly found in 1990s-2000s models
-
2. Advantages of the 05234935 Fuel Injector
-
✅ Precision Fuel Delivery — Ensures optimal spray pattern for efficient combustion.
✅ Improved Fuel Economy — Helps reduce fuel consumption in long-haul applications.
✅ Lower Emissions — Works with DDEC systems to meet EPA standards (especially DDEC IV/V).
✅ Durability — Built to withstand high-pressure conditions (up to 30,000+ PSI).
✅ Compatibility — Works across multiple DDEC generations (III-V) with proper calibration.
✅ Reduced Carbon Buildup — Helps minimize injector coking and deposits. -
3. Key Features
-
🔹 Unit Injector Design — Combines high-pressure pumping and injection in one unit.
🔹 Electronically Controlled — Works with DDEC (Detroit Diesel Electronic Control) for precise timing.
🔹 High-Pressure Operation — Supports common-rail-like efficiency without a separate pump.
🔹 Self-Lubricating Components — Reduces wear and extends service life.
🔹 Optimized Spray Angle — Ensures complete fuel atomization for cleaner burns.
🔹 Interchangeable with Updated Part Numbers — Cross-references with DCA1646P1, 23503217, etc.
Here's a summarized technical specification table for the Detroit Diesel Series 60 Fuel Injector (Part #05234935):
Parameter | Specification |
---|---|
Part Number | 05234935 (OEM) |
Compatible Engines | Detroit Diesel Series 60 (11.1L & 12.7L) |
DDEC Compatibility | DDEC III, IV, V |
Injector Type | Electronic Unit Injector (EUI) |
Operating Pressure | Up to 30,000+ PSI (2070+ bar) |
Spray Pattern | Precision multi-hole nozzle |
Voltage Requirement | 12V/24V (DDEC-controlled) |
Flow Rate | Varies by calibration (trim code-dependent) |
Material | Hardened steel body, wear-resistant internals |
Seal Type | High-temp O-rings & gaskets |
Weight | ~3.5 lbs (1.6 kg) (approx.) |
Torque Spec | 25-30 Nm (18-22 lb-ft) for mounting bolts |
Service Life | 500,000+ miles (with proper maintenance) |
Common Replacements | DCA1646P1, 23503217 |