
0445110434 Bosch injector commonly used in various European vehicles
September 13, 2025
5227015R for Fuel Injector (7015) for Detroit Diesel
September 13, 20255226575 | Detroit Diesel 9A31/DDC Fuel Injector
Key Information
Part Number: 5226575, A-5226575, A5226575, R-5226575, R5226575,5229405Rï¼5229400ï¼5228790ï¼5228795Rï¼5228834Rï¼5229170Rï¼5229180Rï¼5228550Rï¼5228760ï¼5228763ï¼5228770ï¼5228780
Engine Make: Detroit
Inspection Report: Yes
Warranty: 12 Months
Supply Ability: In stock
Payment Way: Paypal, Western Union, Visa, Mastercard, T/T
Details: One model in a neutral box or specific box required by clients.
The part number 5226575 to be associated with a Detroit Diesel Series 60 (S60) fuel injector, rather than a 9A31 model. Here’s what I found:
Part Details:
-
Part Number: 5226575
-
Application: Likely for Detroit Diesel Series 60 (S60) engines (not 9A31).
-
Type: Fuel Injector (Unit Injector)
-
Compatible Engines:
-
Detroit Diesel Series 60 (S60) 11.1L, 12.7L, 14L
-
May also fit some DD13, DD15, or DD16 engines (verify compatibility).
Cross-References & Alternatives:
-
OEM Replacement: Detroit Diesel 23513225 (updated part number)
-
Aftermarket Equivalents:
-
Denso 095000-8081
-
Bosch 0445110376
Notes:
-
The 9A31 is an older DDC two-stroke engine, but 5226575 is more commonly associated with four-stroke Series 60 engines.
-
If you need a 9A31 injector, confirm the correct part number—older two-stroke Detroit Diesels may use different injectors.
Here's a summarized table of the technical parameters for the Detroit Diesel fuel injector (Part #5226575 / 23513225), commonly used in Series 60 (S60) engines:
Parameter | Specification |
---|---|
Part Number | 5226575 (OEM: Updated to 23513225) |
Engine Application | Detroit Diesel Series 60 (S60) 11.1L, 12.7L, 14L |
Type | Electronic Unit Injector (EUI) |
Injection Pressure | ~26,000 – 30,000 psi (varies by engine calibration) |
Voltage | 12V or 24V (Depends on engine electrical system) |
Flow Rate | Varies by calibration (e.g., ~200–400 mm³/stroke) |
Connector Type | Bosch-style EUI electrical connector |
Seal Type | Copper washer (injector-to-cylinder head) |
Torque Specification | ~35–45 lb-ft (follow OEM service manual) |
Compatible Fuels | Standard diesel (ULSD), biodiesel blends (B20 max) |
Weight | ~4–5 lbs (varies by model) |